Wicreset Supported Functions For Epson K300 Printer

Printer Model	Epson K300
Epson K300’s Waste counters can be reset?	YES
Epson K300’s Waste counters can be readed?	YES
Firmware can be changed	NO
Cartridges can be disabled	NO
Firmware for fixing recovery mode must be enabled in the settings.	NO
Additional information.	Read printer waste ink counter(s). Reset printer waste ink counter(s). Read printer status and ink levels. Read diagnostic report from the printer. Clean printhead. Run charging routine. Paper pass test. Paper feed test. Nozzle test. Different drop size test. Read/Write printer serial number. Read/Write printhead identifier. Read/Write printer EEPROM settings. Models with similar specifications: Epson K301

Contact Support For Epson K300 Wicreset Serial Key (Whatapps) ☎  +0084 915 589 236( Zalo 24/7 )

🚓How to check supported functions for Epson K300

Notice: Only Buy Wicreset Key After You checked Your Epson K300 printer was supported by Wicreset.


Notice: Only Buy Downgrade Key After You checked Your Epson K300 printer was supported by Wicreset.


Notice: Only Buy Chipless Key After You checked Your Epson K300 printer was supported by Wicreset.

🚒Basic definitions of wicreset support for Epson K300 printer

🚏What is Wicreset Utility?

– Wicreset is a third-party software, developed to reset Epson K300’s waste ink pad counter from 100% to 0%, making Epson K300 printer can continue printing without being locked or red lights forbidden.
– Free Download Wicreset Epson K300 for Windows:
– Free Download Wicreset Epson K300 for MAC OS:

🚎What is Wicreset’s Serial Key?

– Wicreset’s Serial Key is a sequence of 16 characters, used to activate Wicreset software.

🚓Why do we need to reset Epson K300’s ink pad counter?

– The Epson K300 printer is equipped with a chip located on the maintenance box (waste ink tank box) and it is called Epson K300’s waste ink chip.
– This chip has the function of controlling the amount of waste ink flowing down to the Epson K300 printer to prevent ink from overflowing into the printer, causing the printer to short, burn, dirty prints, or damage equipment..
– This chip has a certain memory, when it is full, it will lock the printer to prevent damage equipment.
– When the Epson K300 printer is locked and cannot print, and the red light is blinking (like the pictures below), we need to reset the chip memory from 100% to 0% to allow the printer is continuing to print.

– Error on the computer service required: The Printer’s Ink Pads at the end of their service life. Please contact Epson Support
– On the printer, the error message flashes red light, either at the same time, or an error is displayed: Service Required, Maintenance Error…

– Tutorial video using Wicreset to reset Epson K300’s ink pad counter (If supported by Wicreset):

– If the Wicreset software supports resetting waste ink for Epson K300 printer, we just need to buy the key wic Epson K300 to reset it, very convenient, low cost, very easy to use.
Notice: Only Buy Wicreset Key After You checked Your Epson K300 printer was supported by Wicreset.

🚒Why do we need to Read Epson K300’s waste ink pad counter?

– Use Wicreset to read the Epson K300 printer’s waste ink counter to assess whether the printer counter is full or still usable.

🚑Why do we need to Change the Epson K300’s firmware

– Epson drivers will automatically update the firmware to the latest version (if you do not turn off the update feature in Epson Monitor), then your printer will not receive external ink cartridges (only recognize genuine ink cartridges), and will give an error message “ink cartridges are not recognized”.
– In this case: if your printer Epson K300 is supported by Wicreset Downgrade Firmware, then we just need to downgrade the firmware to a version that can recognize the external ink chip (CISS) to continue the printing process..
-Video on how to change Epson K300’s Firmware (If supported by Wicreset):

Notice: Only Buy Downgrade Key After You checked Your Epson K300 printer was supported by Wicreset.

🚐Why do we need to make Epson K300 chipless

– If your Epson K300 printer is supported by Wicreset Chipless Function(permanently locks the ink chip), then we just need to run Disable Inkcartridges to be able to use a chipless cartridge or a continuous ink (CISS) without an error saying out of ink. , or ink out error anymore.
– Tutorial video Disable Epson K300’s Inkcartridges (Chipless Firmware) (If supported by Wicreset):

🚏Why do we need to run Recovery Mode for Epson K300

– In some cases your Epson K300 printer does not accept to load firmware (Epson company locks this feature) into the machine to lock the chip Disable Inkcartridges (Chipless Firmware) or change the firmware (Downgrade Firmware), the printer will is stopped in Recovery Mode but cannot boot into normal mode.
– With this error, we need to use Wicreset to update to a stable firmware version, where the printer can work as usual.
– Tutorial video to fix Recovery Mode error for Epson K300 printer:

Notice: Only Buy Chipless Key After You checked Your Epson K300 printer was supported by Wicreset.


– Notice: You should not buy a WIC key to fix Epson K300 error if your printer is not in the Wicreset supports list.

🚑Frequently asked questions during using Wic key for Epson K300

– Do I have to turn off antivirus and Epson Monitor?
✔️ Yes, please turn off antivirus and firewall before resetting. Turn off Epson K300 Monitor on the driver to make it easier to read the counter. Delete all printing jobs on the printer, restart both the computer and the printer K300 to make sure both are still working properly.
– I have multiple printers with different brands connected to my computer, do I need to unplug them all??
✔️ Yes, you only have the Epson K300 printer directly connected from the computer to the printer via USB, not using wifi connection or, printer server or other devices. printer hub (USB Hub) to connect to a printer.
– Does my computer need an internet connection and pre-installed drivers?
✔️ You should make sure that the USB cable connected from the computer to the printer is still working fine and the computer must be connected to the internet, the driver is not necessary to install..
– Can I ask you to download, install and reset Epson printer K300 over the network using Ultraviewer/Teamviewer/AnyDesk software?
✔️ Okay, please contact the information in this post or the Contact US on the website.
– Can I use 1 key Wic to reset for multiple Epson K300 printers ?
✔️ Each Wicreset Key, you can only fix for 1 Epson K300 printer and it is onetime using.
– Reset the counter for Epson K300 printer, will it happen again in the future?
✔️ Yes, so after resetting, we should not scan the printhead too many times, because this will make the printer’s counter increase quickly and it need to buy newKey Wic.

– Run chipless key to disable inkcartridge chip for Epson K300 printer , will it happen again?
✔️ No, if you turn off the automatic update feature on the driver. Yes, if you do not turn off automatic update feature on the driver.

🚐Contact US to buy cheap Wic key

Contact Support For Epson K300 Wicreset Serial Key (Whatapps) ☎  +0084 915 589 236( Zalo 24/7 )

– The article Reset Epson K300 is compiled from reputable websites specializing in repairing Epson K300 printer:
– https://chiplessprinter.com/how-to-reset-epson-k300.html
– https://caidatmayin.net/key-wicreset-ho-tro-cho-may-in-epson-k300/
– https://caidatmayin.com/key-wic-reset-may-in-epson-k300/