| Printer Model | Epson PP-50 |
| Epson PP-50’s Waste counters can be reset? | YES |
| Epson PP-50’s Waste counters can be readed? | NO |
| Firmware can be changed | NO |
| Cartridges can be disabled | NO |
| Firmware for fixing recovery mode must be enabled in the settings. | NO |
| Additional information. | Reset printer waste ink counter(s). Read printer status and ink levels. |
🐓How to check supported functions for Epson PP-50
Notice: Only Buy Wicreset Key After You checked Your Epson PP-50 printer was supported by Wicreset.
Notice: Only Buy Downgrade Key After You checked Your Epson PP-50 printer was supported by Wicreset.
Notice: Only Buy Chipless Key After You checked Your Epson PP-50 printer was supported by Wicreset.
🐒Basic definitions of wicreset support for Epson PP-50 printer
🐏What is Wicreset Utility?
– Wicreset is a third-party software, developed to reset Epson PP-50’s waste ink pad counter from 100% to 0%, making Epson PP-50 printer can continue printing without being locked or red lights forbidden.
– Free Download Wicreset Epson PP-50 for Windows: 
– Free Download Wicreset Epson PP-50 for MAC OS:
🐎What is Wicreset’s Serial Key?
– Wicreset’s Serial Key is a sequence of 16 characters, used to activate Wicreset software.
🐓Why do we need to reset Epson PP-50’s ink pad counter?
– The Epson PP-50 printer is equipped with a chip located on the maintenance box (waste ink tank box) and it is called Epson PP-50’s waste ink chip.
– This chip has the function of controlling the amount of waste ink flowing down to the Epson PP-50 printer to prevent ink from overflowing into the printer, causing the printer to short, burn, dirty prints, or damage equipment..
– This chip has a certain memory, when it is full, it will lock the printer to prevent damage equipment.
– When the Epson PP-50 printer is locked and cannot print, and the red light is blinking (like the pictures below), we need to reset the chip memory from 100% to 0% to allow the printer is continuing to print.
– Error on the computer service required: The Printer’s Ink Pads at the end of their service life. Please contact Epson Support
– On the printer, the error message flashes red light, either at the same time, or an error is displayed: Service Required, Maintenance Error…
– Tutorial video using Wicreset to reset Epson PP-50’s ink pad counter (If supported by Wicreset):
– If the Wicreset software supports resetting waste ink for Epson PP-50 printer, we just need to buy the key wic Epson PP-50 to reset it, very convenient, low cost, very easy to use.
Notice: Only Buy Wicreset Key After You checked Your Epson PP-50 printer was supported by Wicreset.
🐒Why do we need to Read Epson PP-50’s waste ink pad counter?
– Use Wicreset to read the Epson PP-50 printer’s waste ink counter to assess whether the printer counter is full or still usable.
🐑Why do we need to Change the Epson PP-50’s firmware
– Epson drivers will automatically update the firmware to the latest version (if you do not turn off the update feature in Epson Monitor), then your printer will not receive external ink cartridges (only recognize genuine ink cartridges), and will give an error message “ink cartridges are not recognized”.
– In this case: if your printer Epson PP-50 is supported by Wicreset Downgrade Firmware, then we just need to downgrade the firmware to a version that can recognize the external ink chip (CISS) to continue the printing process..
-Video on how to change Epson PP-50’s Firmware (If supported by Wicreset):
Notice: Only Buy Downgrade Key After You checked Your Epson PP-50 printer was supported by Wicreset.
🐐Why do we need to make Epson PP-50 chipless
– If your Epson PP-50 printer is supported by Wicreset Chipless Function(permanently locks the ink chip), then we just need to run Disable Inkcartridges to be able to use a chipless cartridge or a continuous ink (CISS) without an error saying out of ink. , or ink out error anymore.
– Tutorial video Disable Epson PP-50’s Inkcartridges (Chipless Firmware) (If supported by Wicreset):
🐏Why do we need to run Recovery Mode for Epson PP-50
– In some cases your Epson PP-50 printer does not accept to load firmware (Epson company locks this feature) into the machine to lock the chip Disable Inkcartridges (Chipless Firmware) or change the firmware (Downgrade Firmware), the printer will is stopped in Recovery Mode but cannot boot into normal mode.
– With this error, we need to use Wicreset to update to a stable firmware version, where the printer can work as usual.
– Tutorial video to fix Recovery Mode error for Epson PP-50 printer:
Notice: Only Buy Chipless Key After You checked Your Epson PP-50 printer was supported by Wicreset.
– Notice: You should not buy a WIC key to fix Epson PP-50 error if your printer is not in the Wicreset supports list.
🐑Frequently asked questions during using Wic key for Epson PP-50
– Do I have to turn off antivirus and Epson Monitor?
✔️ Yes, please turn off antivirus and firewall before resetting. Turn off Epson PP-50 Monitor on the driver to make it easier to read the counter. Delete all printing jobs on the printer, restart both the computer and the printer PP-50 to make sure both are still working properly.
– I have multiple printers with different brands connected to my computer, do I need to unplug them all??
✔️ Yes, you only have the Epson PP-50 printer directly connected from the computer to the printer via USB, not using wifi connection or, printer server or other devices. printer hub (USB Hub) to connect to a printer.
– Does my computer need an internet connection and pre-installed drivers?
✔️ You should make sure that the USB cable connected from the computer to the printer is still working fine and the computer must be connected to the internet, the driver is not necessary to install..
– Can I ask you to download, install and reset Epson printer PP-50 over the network using Ultraviewer/Teamviewer/AnyDesk software?
✔️ Okay, please contact the information in this post or the Contact US on the website.
– Can I use 1 key Wic to reset for multiple Epson PP-50 printers ?
✔️ Each Wicreset Key, you can only fix for 1 Epson PP-50 printer and it is onetime using.
– Reset the counter for Epson PP-50 printer, will it happen again in the future?
✔️ Yes, so after resetting, we should not scan the printhead too many times, because this will make the printer’s counter increase quickly and it need to buy newKey Wic.
– Run chipless key to disable inkcartridge chip for Epson PP-50 printer , will it happen again?
✔️ No, if you turn off the automatic update feature on the driver. Yes, if you do not turn off automatic update feature on the driver.
🐐Contact US to buy cheap Wic key
– The article Reset Epson PP-50 is compiled from reputable websites specializing in repairing Epson PP-50 printer:
– https://chiplessprinter.com/how-to-reset-epson-pp-50.html
– https://caidatmayin.net/key-wicreset-ho-tro-cho-may-in-epson-pp-50/
– https://caidatmayin.com/key-wic-reset-may-in-epson-pp-50/